Constantin Chassapis

• PhD (1988) The City University of New York (Mechanical Engineering)
• ME (1981) The City College, City University of New York (Mechanical Engineering)
• BE (1979) The City College, City University of New York (Mechanical Engineering)

• SME Journal of Mechanical Design, ASME Journal of Mechanisms, Transmissions, and Automation in Design, ASME Mechanisms Conferences, Advances in Polymer Technology, McGraw Hill, Kluwer Academic Publishers Reviewer
• ASME, NSF and SME Recipient of tuition scholarship awards to attend short courses in composite materials and automated manufacturing

Book

1. Zhang, Z.; Zhang, M.; Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). Collaborative virtual laboratory environments with hardware in the loop. Cyber-Physical Laboratories in Engineering and Science Education (pp. 363-402).

Book Chapter

1. Zhang, Z.; Zhang, M.; Chang, Y.; Aziz, E. S.; Eshe, S.; Chassapis, C. (2018). Collaborative virtual laboratory environments with hardware in the loop. Cyber-Physical Laboratories in Engineering and Science Education (pp. 363-402).
2. Zhang, Z.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). A virtual proctor with biometric authentication for facilitating distance education. Lecture Notes in Networks and Systems (vol. 22, pp. 110-124).
3. Esche, S.; Chassapis, C. (2011). On infrastructures for educational online laboratories. Internet Accessible Remote Laboratories: Scalable E-Learning Tools for Engineering and Science Disciplines (pp. 229-253).

Book Chapter, Book Series

1. Zhang, Z.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). A virtual proctor with biometric authentication for facilitating distance education. Lecture Notes in Networks and Systems (vol. 22, pp. 110-124).

Conference Proceeding

1. Elbahloul, M.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid Gear Mechanism versus Slider-Crank Mechanism in Engines. Anaheim, CA: Proceedings of the ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE2019.
2. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid gear mechanism versus slider-crank mechanism in engines. Proceedings of the ASME Design Engineering Technical Conference (vol. 10).
3. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid gear mechanism versus slider-crank mechanism in engines. Proceedings of the ASME Design Engineering Technical Conference (vol. 10).
4. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Hypocycloid gear mechanism versus slider-crank mechanism in engines. Proceedings of the ASME Design Engineering Technical Conference (vol. 10).
5. Zhang, Z.; Zhang, M.; Chang, Y.; Esche, S.; Chassapis, C. (2016). A virtual laboratory system with biometric authentication and remote proctoring based on facial recognition. ASEE Annual Conference and Exposition, Conference Proceedings (vol. 2016-June).
6. Zhou, Z.; Mingshao, Z.; Yizhe, C.; Esche, S.; Chassapis, C. (2016). A virtual laboratory combined with biometric authentication and 3D reconstruction. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
7. Zhang, Z.; Zhang, M.; Chang, Y.; Esche, S.; Chassapis, C. (2015). A smart method for developing game-based virtual laboratories. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5-2015).
8. Zhang, Z.; Zhang, M.; Chang, Y.; Esche, S.; Chassapis, C. (2015). Real-time 3D reconstruction for facilitating the development of game-based virtual laboratories. ASEE Annual Conference and Exposition, Conference Proceedings (122nd ASEE Annual Conference and Exposition: Making Value for Society ed., vol. 122nd ASEE Annual Conference and Exposition: Making Value for Society).
9. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S.; Chassapis, C. (2014). A platform for mechanical assembly education using the Microsoft Kinect. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
10. Chang, Y.; Aziz, E. S.; Zhang, Z.; Zhang, M.; Esche, S.; Chassapis, C. (2014). A platform for mechanical assembly education using the Microsoft Kinect. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
11. Zhang, M.; Zhang, Z.; Esche, S.; Chassapis, C. (2014). Algorithm modification approach to improve the Kinect's performance in point cloud processing. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
12. Zhang, Z.; Zhang, M.; Chang, Y.; Esche, S.; Chassapis, C. (2014). An efficient method for creating virtual spaces for virtual reality. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
13. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). A framework for developing collaborative training environments for assembling. ASEE Annual Conference and Exposition, Conference Proceedings.
14. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). A framework for developing collaborative training environments for assembling. ASEE Annual Conference and Exposition, Conference Proceedings.
15. Serdar, T.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Integration of augmented reality into the CAD process. ASEE Annual Conference and Exposition, Conference Proceedings.
16. Serdar, T.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Integration of augmented reality into the CAD process. ASEE Annual Conference and Exposition, Conference Proceedings.
17. Tumkor, S.; Esche, S.; Chassapis, C. (2013). Hand gestures in CAD systems. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 12).
18. Zhang, M.; Zhang, Z.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Kinect-based universal range sensor for laboratory experiments. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
19. Zhang, M.; Zhang, Z.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Kinect-based universal range sensor for laboratory experiments. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
20. Ibrahim, I. H.; Chassapis, C. (2013). Quantitative assessment of the risk of variations during medical device lifecycle. ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation, FMD 2013.
21. Zhang, Z.; Zhang, M.; Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Real-time 3D model reconstruction and interaction using kinect for a game-based virtual laboratory. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
22. Zhang, Z.; Zhang, M.; Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2013). Real-time 3D model reconstruction and interaction using kinect for a game-based virtual laboratory. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5).
23. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2012). Capturing assembly constraints of experimental setups in a virtual laboratory environment. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5, pp. 191-200).
24. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2012). Capturing assembly constraints of experimental setups in a virtual laboratory environment. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5, pp. 191-200).
25. Tumkor, S.; Esche, S.; Chassapis, C. (2012). Design of remote laboratory experiments using labview web services. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5, pp. 171-179).
26. Aziz, E. S.; Corter, J. E.; Chang, Y.; Esche, S.; Chassapis, C. (2012). Evaluation of the learning effectiveness of game-based and hands-on gear train laboratories. Proceedings - Frontiers in Education Conference, FIE.
27. Aziz, E. S.; Corter, J. E.; Chang, Y.; Esche, S.; Chassapis, C. (2012). Evaluation of the learning effectiveness of game-based and hands-on gear train laboratories. Proceedings - Frontiers in Education Conference, FIE.
28. Tumkor, S.; Zhang, M.; Zhang, Z.; Chang, Y.; Esche, S.; Chassapis, C. (2012). Integration of a real-time remote experiment into a multi-player game laboratory environment. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 5, pp. 181-190).
29. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). Assessment of the pilot implementation of a game-based gear design laboratory. Proceedings - Frontiers in Education Conference, FIE.
30. Altuger-Genc, G.; Chassapis, C. (2011). Fostering lifelong learning in a capstone design environment: An implementation assessment. Proceedings - Frontiers in Education Conference, FIE.
31. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). A game-based laboratory for gear design. ASEE Annual Conference and Exposition, Conference Proceedings.
32. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). A game-based laboratory for gear design. ASEE Annual Conference and Exposition, Conference Proceedings.
33. Aziz, E. S.; Wang, Z.; Esche, S.; Chassapis, C. (2011). Development of a modularized architecture for remote-access laboratories. ASEE Annual Conference and Exposition, Conference Proceedings.
34. Aziz, E. S.; Wang, Z.; Esche, S.; Chassapis, C. (2011). Development of a modularized architecture for remote-access laboratories. ASEE Annual Conference and Exposition, Conference Proceedings.
35. Serdar, T.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). Educational use of virtual worlds for engineering students. ASEE Annual Conference and Exposition, Conference Proceedings.
36. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). Overcoming the limitations of current online laboratory systems using game-based virtual environments. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (vol. 5, pp. 159-168).
37. Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2011). Overcoming the limitations of current online laboratory systems using game-based virtual environments. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (vol. 5, pp. 159-168).
38. Aziz, E. S.; Chang, Y.; Tumkor, S.; Esche, S.; Chassapis, C. (2010). Adapting computer game technology to support engineering laboratories. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 6, pp. 75-85).
39. Aziz, E. S.; Chang, Y.; Tumkor, S.; Esche, S.; Chassapis, C. (2010). Adapting computer game technology to support engineering laboratories. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 6, pp. 75-85).
40. Altuger, G.; Chassapis, C. (2010). Manual assembly line operator scheduling using hierarchical preference aggregation. Proceedings - Winter Simulation Conference (pp. 1613-1623).
41. Altuger, G.; Chassapis, C. (2010). Work in progress - Preparing students for lifelong learning in a capstone design environment. Proceedings - Frontiers in Education Conference, FIE.
42. Altuger, G.; Chassapis, C. (2009). Multi criteria preventive maintenance scheduling through arena based simulation modeling. Proceedings - Winter Simulation Conference (pp. 2123-2134).
43. Dai, S.; Aziz, E. S.; Esche, S.; Chassapis, C. (2009). A remotely accessed flow rig student laboratory. ASME International Mechanical Engineering Congress and Exposition, Proceedings (vol. 9, pp. 259-267).
44. Dai, S.; Aziz, E. S.; Esche, S.; Chassapis, C. (2009). A remotely accessed flow rig student laboratory. ASME International Mechanical Engineering Congress and Exposition, Proceedings (vol. 9, pp. 259-267).
45. Aziz, E. S.; Esche, S.; Chassapis, C. (2009). Review of the state of the art in virtual learning environments based on multi-player computer games. ASEE Annual Conference and Exposition, Conference Proceedings.
46. Arango, F.; Aziz, E. S.; Esche, S.; Chassapis, C. (2008). A review of applications of computer games in education and training. Proceedings - Frontiers in Education Conference, FIE.
47. Arango, F.; Aziz, E. S.; Esche, S.; Chassapis, C. (2008). A review of applications of computer games in education and training. Proceedings - Frontiers in Education Conference, FIE.
48. Li, Y.; Esche, S.; Chassapis, C. (2008). A scheduling system for shared online laboratory resources. Proceedings - Frontiers in Education Conference, FIE.
49. Aziz, E. S.; Chassapis, C. (2008). Introduction to the ME curriculum through product engineering case studies. Proceedings - Frontiers in Education Conference, FIE.
50. Aziz, E. S.; Chassapis, C. (2008). Introduction to the ME curriculum through product engineering case studies. Proceedings - Frontiers in Education Conference, FIE.
51. Chassapis, C.; Aziz, E. S.; Esche, S. (2008). IT-enhanced laboratory experience within a mechanical engineering undergraduate curriculum. Proceedings of 18th Analysis and Computation Speciality Conference - Structures Congress 2008: Crossing the Borders (vol. 315).
52. Chassapis, C.; Aziz, E. S.; Esche, S. (2008). IT-enhanced laboratory experience within a mechanical engineering undergraduate curriculum. Proceedings of 18th Analysis and Computation Speciality Conference - Structures Congress 2008: Crossing the Borders (vol. 315).
53. Aziz, E. S.; Chassapis, C.; Esche, S.; Dai, S.; Xu, S.; Jia, R. (2008). Online wind tunnel laboratory. ASEE Annual Conference and Exposition, Conference Proceedings.
54. Aziz, E. S.; Chassapis, C.; Esche, S.; Dai, S.; Xu, S.; Jia, R. (2008). Online wind tunnel laboratory. ASEE Annual Conference and Exposition, Conference Proceedings.
55. Arango, F.; Altuger, G.; Aziz, E. S.; Chassapis, C.; Esche, S. (2008). Piloting a game-based virtual learning environment. ASEE Annual Conference and Exposition, Conference Proceedings.
56. Arango, F.; Altuger, G.; Aziz, E. S.; Chassapis, C.; Esche, S. (2008). Piloting a game-based virtual learning environment. ASEE Annual Conference and Exposition, Conference Proceedings.
57. Arango, F.; Chang, C.; Esche, S.; Chassapis, C. (2007). A scenario for collaborative learning in virtual engineering laboratories. Proceedings - Frontiers in Education Conference, FIE.
58. Li, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2007). Classification of and search for online laboratory resources using a coding approach. Proceedings - Frontiers in Education Conference, FIE.
59. Li, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2007). Classification of and search for online laboratory resources using a coding approach. Proceedings - Frontiers in Education Conference, FIE.
60. Aziz, E. S.; Esche, S.; Chassapis, C. (2007). On the design of a Virtual Learning Environment for mechanical vibrations. Proceedings - Frontiers in Education Conference, FIE.
61. Aziz, E. S.; Esche, S.; Chassapis, C. (2007). On the design of a Virtual Learning Environment for mechanical vibrations. Proceedings - Frontiers in Education Conference, FIE.
62. Li, Y.; Esche, S.; Chassapis, C. (2007). An architecture for real-time remote laboratories. ASEE Annual Conference and Exposition, Conference Proceedings.
63. Aziz, E. S.; Esche, S.; Chassapis, C. (2007). Enhancing the learning experience using simulation and experimentation to teach mechanical vibrations. ASEE Annual Conference and Exposition, Conference Proceedings.
64. Aziz, E. S.; Esche, S.; Chassapis, C. (2007). Enhancing the learning experience using simulation and experimentation to teach mechanical vibrations. ASEE Annual Conference and Exposition, Conference Proceedings.
65. Fisher, F.; Hadim, H.; Esche, S.; Ubell, R.; Chassapis, C. (2007). Feasibility of a fully online undergraduate mechanical engineering degree for non-traditional learners. ASEE Annual Conference and Exposition, Conference Proceedings.
66. Aziz, E. S.; Chang, C.; Arango, F.; Esche, S.; Chassapis, C. (2007). Linking computer game engines with remote experiments. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 7, pp. 413-420).
67. Aziz, E. S.; Chang, C.; Arango, F.; Esche, S.; Chassapis, C. (2007). Linking computer game engines with remote experiments. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 7, pp. 413-420).
68. Chang, C. P.; Arango, F.; Esche, S.; Chassapis, C. (2007). On the assembly of experimental setups in virtual laboratory environments. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (vol. 7, pp. 421-428).
69. Farina, A. P.; Chassapis, C.; Chen, Y. M. (2006). Integration and optimization of projectile design models. Collection of Technical Papers - AIAA Modeling and Simulation Technologies Conference, 2006 (vol. 1, pp. 525-542).
70. Jia, R.; Shanjun, X.; Songyun, G.; Aziz, E. S.; Esche, S.; Chassapis, C. (2006). A virtual laboratory on fluid mechanics. ASEE Annual Conference and Exposition, Conference Proceedings.
71. Jia, R.; Shanjun, X.; Songyun, G.; Aziz, E. S.; Esche, S.; Chassapis, C. (2006). A virtual laboratory on fluid mechanics. ASEE Annual Conference and Exposition, Conference Proceedings.
72. Li, Y.; Esche, S.; Chassapis, C. (2006). A Web services approach for sharing remote laboratory resources. Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education.
73. Aziz, E. S.; Esche, S.; Chassapis, C. (2006). An architecture for virtual laboratory experimentation. ASEE Annual Conference and Exposition, Conference Proceedings.
74. Aziz, E. S.; Esche, S.; Chassapis, C. (2006). An architecture for virtual laboratory experimentation. ASEE Annual Conference and Exposition, Conference Proceedings.
75. Fisher, F.; Chassapis, C. (2006). Guided CAE software learning modules for the undergraduate mechanical engineering curriculum. ASEE Annual Conference and Exposition, Conference Proceedings.
76. Chang, C.; Kodman, D.; Esche, S.; Chassapis, C. (2006). Immersive collaborative laboratory simulations using a gaming engine. ASEE Annual Conference and Exposition, Conference Proceedings.
77. Aziz, E. S.; Chassapis, C.; Esche, S. (2006). On the integration of remote and virtual experiments into a comprehensive student laboratory experience. Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education.
78. Aziz, E. S.; Chassapis, C.; Esche, S. (2006). On the integration of remote and virtual experiments into a comprehensive student laboratory experience. Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education.
79. Nastasi, J.; Sheppard, K.; Chassapis, C. (2006). Revision of freshman engineering graphics to support an evolving core design sequence. ASEE Annual Conference and Exposition, Conference Proceedings.
80. Chang, C. P.; Arango, F.; Kodman, D.; Esche, S.; Chassapis, C. (2006). Utilization of immersive collaborative student laboratory simulations developed using a game engine. Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education.
81. Chen, Y. M.; Sharon, J.; Esche, S.; Chassapis, C. (2005). Integration of probabilistic decision making into a junior year engineering design course. ASEE Annual Conference and Exposition, Conference Proceedings (pp. 8565-8573).
82. Hadim, H.; Pochiraju, K.; Chassapis, C.; Vaccari, D.; Sheppard, K.; Korfiatis, G. (2005). Mechanical engineering program assessment in the Schaefer school of engineering at Stevens Institute of Technology. ASEE Annual Conference and Exposition, Conference Proceedings (pp. 10199-10215).
83. Corter, J. E.; Nickerson, J.; Esche, S.; Chassapis, C. (2004). Remote versus hands-on labs: A comparative study. Proceedings - Frontiers in Education Conference, FIE (vol. 2).
84. Aziz, E. S.; Chassapis, C. (2004). Development of process optimization for an intelligent knowledge-based system for spur gear precision forging die design. Proceedings of the ASME Design Engineering Technical Conference (vol. 1, pp. 313-320).
85. Aziz, E. S.; Chassapis, C. (2003). An intelligent design system for agile design and manufacturing of mechanical transmission systems. Proceedings of the ASME Design Engineering Technical Conference (vol. 4 A, pp. 397-408).
86. Aziz, E. S.; Chassapis, C. (2002). A knowledge-based approach to spur gear fabrication in precision forging process. ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002 (vol. 2, pp. 505-515).
87. Esche, S.; Chassapis, C.; Nazalewicz, J. W.; Hromin, D. J. (2002). A scalable system architecture for remote experimentation. Proceedings - Frontiers in Education Conference (vol. 1).
88. Aziz, E. S.; Chassapis, C. (2002). Development of an interactive web-based support system for gear design. ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002 (vol. 2, pp. 753-763).
89. Aziz, E. S.; Chassapis, C. (2002). Development of an interactive web-based support system for gear design. ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002 (vol. 2, pp. 753-763).
90. Aziz, E. S.; Chassapis, C. (2002). A knowledge-based approach to spur gear fabrication in precision forging process. Proceedings of the ASME Design Engineering Technical Conference (vol. 2, pp. 505-515).
91. Aziz, E. S.; Chassapis, C. (2002). Development of an interactive web-based support system for gear design. Proceedings of the ASME Design Engineering Technical Conference (vol. 2, pp. 753-763).
92. Aziz, E. S.; Chassapis, C. (2001). An intelligent system for spur gear design and analysis. Proceedings of the ASME Design Engineering Technical Conference (vol. 2, pp. 277-286).
93. Esche, S.; Pochiraju, K.; Chassapis, C. (2001). Implementation of assessment procedures into the mechanical engineering curriculum. ASEE Annual Conference Proceedings (pp. 5523-5538).
94. Esche, S.; Prasad, M.; Chassapis, C. (2000). Remotely accessible laboratory approach for undergraduate education. ASEE Annual Conference Proceedings (pp. 5005-5014).
95. Esche, S.; Fidan, I.; Chassapis, C.; Manoochehri, S. (1999). Knowledge-based part and process design for metal forging. SAE Technical Papers.
96. Tang, L. Q.; Pochiraju, K.; Chassapis, C.; Manoochehri, S. (1996). Optimal design of cooling system for injection molding. Annual Technical Conference - ANTEC, Conference Proceedings (vol. 1, pp. 714-718).
97. Due, M. J.; Chassapis, C. (1996). Tolerance design synthesis in a concurrent engineering environment. American Society of Mechanical Engineers, Materials Division (Publication) MD (vol. 74, pp. 177-178).
98. Webb, D.; Gerdes, V.; Manoochehri, S.; Chassapis, C. (1995). Intelligent mold shop database: centralizing information to gain efficiency and flexibility. Annual Technical Conference - ANTEC, Conference Proceedings (vol. 1, pp. 983-987).
99. Swern, F. L.; Chassapis, C.; Van Der Veen, A. P. (1994). An intelligent control paradigm for flight control applications. Guidance, Navigation, and Control Conference, 1994 (pp. 401-409).
100. Xu, T.; Chassapis, C. (1994). Functional feature-based approximate structural analysis for injection molded LFRTP part. Annual Technical Conference - ANTEC, Conference Proceedings (pt 2 ed., pp. 2300-2302).
101. Cantwell, M.; Chassapis, C. (1994). Prototype spray metal injection mold for long fiber reinforced thermoplastic part. Annual Technical Conference - ANTEC, Conference Proceedings (pt 1 ed., pp. 1142-1145).

Journal Article

1. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2021). Performance study of the hypocycloid gear mechanism for internal combustion engine applications. International Journal of Engine Research (4 ed., vol. 22, pp. 1222-1238).
2. ElBahloul, M. A.; Aziz, E. L.; Chassapis, C. (2019). Mechanical efficiency prediction methodology of the hypocycloid gear mechanism for internal combustion engine application. International Journal on Interactive Design and Manufacturing (1 ed., vol. 13, pp. 221-233).
3. ElBahloul, M. A.; Aziz Ramadan, E. S.; Chassapis, C. (2019). Mechanical efficiency prediction methodology of the hypocycloid gear mechanism for internal combustion engine application. International Journal on Interactive Design and Manufacturing (1 ed., vol. 13, pp. 221-233).
4. ElBahloul, M. A.; Aziz, E. L.; Chassapis, C. (2019). Mechanical efficiency prediction methodology of the hypocycloid gear mechanism for internal combustion engine application. International Journal on Interactive Design and Manufacturing (1 ed., vol. 13, pp. 221-233).
5. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Performance study of the hypocycloid gear mechanism for internal combustion engine applications. International Journal of Engine Research.
6. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Performance study of the hypocycloid gear mechanism for internal combustion engine applications. International Journal of Engine Research.
7. ElBahloul, M. A.; Aziz, E. S.; Chassapis, C. (2019). Performance study of the hypocycloid gear mechanism for internal combustion engine applications. International Journal of Engine Research.
8. Ibrahim, I. H.; Chassapis, C. (2018). A variation risk management methodology for an interactive pharmaceutical design and manufacturing environment. International Journal on Interactive Design and Manufacturing (1 ed., vol. 12, pp. 25-36).
   https://link.springer.com/article/10.1007%2Fs12008-017-0371-6.
9. Zhang, M.; Zhang, Z.; Chang, Y.; Aziz, E. S.; Esche, S.; Chassapis, C. (2018). Recent developments in game-based virtual reality educational laboratories using the microsoft kinect. International Journal of Emerging Technologies in Learning (1 ed., vol. 13, pp. 138-159).
10. Aziz, E. S.; Chassapis, C. (2016). Enhanced Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Journal of Mechanical Design, Transactions of the ASME (12 ed., vol. 138).
11. Aziz, E. S.; Chassapis, C. (2016). Enhanced Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Journal of Mechanical Design, Transactions of the ASME (12 ed., vol. 138).
12. Aziz, E. S.; Chassapis, C. (2016). Enhanced Hypocycloid Gear Mechanism for Internal Combustion Engine Applications. Journal of Mechanical Design, Transactions of the ASME (12 ed., vol. 138).
13. Hu, Y.; Aziz, E. S.; Chassapis, C. (2016). Creativity-based design innovation environment in support of robust product development. International Journal on Interactive Design and Manufacturing (4 ed., vol. 10, pp. 335-353).
14. Hu, Y.; Aziz, E. S.; Chassapis, C. (2016). Creativity-based design innovation environment in support of robust product development. International Journal on Interactive Design and Manufacturing (4 ed., vol. 10, pp. 335-353).
15. Hu, Y.; Aziz, E. S.; Chassapis, C. (2016). Creativity-based design innovation environment in support of robust product development. International Journal on Interactive Design and Manufacturing (4 ed., vol. 10, pp. 335-353).
16. Zhang, Z.; Zhang, M.; Chang, Y.; Esche, S.; Chassapis, C. (2016). A Virtual laboratory system with biometric authentication and remote proctoring based on facial recognition. Computers in Education Journal (4 ed., vol. 16, pp. 74-84).
17. Zhang, M.; Zhang, Z.; Chang, Y.; Esche, S.; Chassapis, C. (2015). Kinect-based universal range sensor and its application in educational laboratories. International Journal of Online Engineering (2 ed., vol. 11, pp. 26-35).
18. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2015). Virtual Mechanical Assembly Training Based on a 3D Game Engine. Computer-Aided Design and Applications (2 ed., vol. 12, pp. 119-134).
19. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2015). Virtual Mechanical Assembly Training Based on a 3D Game Engine. Computer-Aided Design and Applications (2 ed., vol. 12, pp. 119-134).
20. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2014). A multi-user virtual laboratory environment for gear train design. Computer Applications in Engineering Education (4 ed., vol. 22, pp. 788-802).
21. Aziz, E. S.; Chang, Y.; Esche, S.; Chassapis, C. (2014). A multi-user virtual laboratory environment for gear train design. Computer Applications in Engineering Education (4 ed., vol. 22, pp. 788-802).
22. Aziz, E. S.; Chassapis, C. (2014). Comparative analysis of tooth-root strength using stress-strength interference (SSI) theory with FEM-based verification. International Journal on Interactive Design and Manufacturing (3 ed., vol. 8, pp. 159-170).
23. Aziz, E. S.; Chassapis, C. (2014). Comparative analysis of tooth-root strength using stress-strength interference (SSI) theory with FEM-based verification. International Journal on Interactive Design and Manufacturing (3 ed., vol. 8, pp. 159-170).
24. Zhang, Z.; Zhang, M.; Tumkor, S.; Chang, Y.; Esche, S.; Chassapis, C. (2013). Integration of physical devices into game-based virtual reality. International Journal of Online Engineering (5 ed., vol. 9, pp. 25-38).
25. Busch-Vishniac, I.; Kibler, T.; Campbell, P. B.; Patterson, E.; Guillaume, D.; Jarosz, J.; Chassapis, C.; Emery, A.; Ellis, G.; Whitworth, H.; Metz, S.; Brainard, S.; Ray, P. (2011). Deconstructing engineering education programmes: The deep project to reform the mechanical engineering curriculum. European Journal of Engineering Education (3 ed., vol. 36, pp. 269-283).
26. Aziz, E. S.; Esche, S.; Chassapis, C. (2010). An interactive game-based engineering laboratory. World Transactions on Engineering and Technology Education (2 ed., vol. 8, pp. 131-136).
27. Aziz, E. S.; Esche, S.; Chassapis, C. (2010). An interactive game-based engineering laboratory. World Transactions on Engineering and Technology Education (2 ed., vol. 8, pp. 131-136).
28. Aziz, E. S.; Esche, S.; Chassapis, C. (2009). Content-rich interactive online laboratory systems. Computer Applications in Engineering Education (1 ed., vol. 17, pp. 61-79).
29. Aziz, E. S.; Esche, S.; Chassapis, C. (2009). Content-rich interactive online laboratory systems. Computer Applications in Engineering Education (1 ed., vol. 17, pp. 61-79).
30. Arango, F.; Altuger, G.; Aziz, E. S.; Chassapis, C.; Esche, S. (2008). Piloting a game-based virtual learning environment. Computers in Education Journal (4 ed., vol. 18, pp. 82-91).
31. Arango, F.; Altuger, G.; Aziz, E. S.; Chassapis, C.; Esche, S. (2008). Piloting a game-based virtual learning environment. Computers in Education Journal (4 ed., vol. 18, pp. 82-91).
32. Nickerson, J.; Corter, J. E.; Esche, S.; Chassapis, C. (2007). A model for evaluating the effectiveness of remote engineering laboratories and simulations in education. Computers and Education (3 ed., vol. 49, pp. 708-725).
33. Corter, J. E.; Nickerson, J.; Esche, S.; Chassapis, C.; Im, S.; Ma, J. (2007). Constructing reality: A study of remote, hands-on, and simulated laboratories. ACM Transactions on Computer-Human Interaction (2 ed., vol. 14).
34. Chenghung, C.; Kodman, D.; Chassapis, C.; Esche, S. (2007). Immersive collaborative laboratory simulations using a game engine. Computers in Education Journal (3 ed., vol. 17, pp. 85-92).
35. Aziz, E. S.; Chassapis, C. (2005). A decision-making framework model for design and manufacturing of mechanical transmission system development. Engineering with Computers (2 ed., vol. 21, pp. 164-176).
36. Aziz, E. S.; Chassapis, C. (2005). A decision-making framework model for design and manufacturing of mechanical transmission system development. Engineering with Computers (2 ed., vol. 21, pp. 164-176).
37. Foroulis, C. N.; Kotoulas, C. S.; Kakouros, S.; Evangelatos, G.; Chassapis, C.; Konstantinou, M.; Lioulias, A. G. (2004). Study on the late effect of pneumonectomy on right heart pressures using Doppler echocardiography. European Journal of Cardio-thoracic Surgery (3 ed., vol. 26, pp. 508-514).
38. Aziz, E. S.; Chassapis, C. (2002). Knowledge-based geometry generation for spur and helical gears. Concurrent Engineering Research and Applications (3 ed., vol. 10, pp. 251-261).
39. Park, K. M.; Pochiraju, K.; Chassapis, C.; Manoochehri, S. (2002). Rapid manufacturability evaluation of die-cast components. Concurrent Engineering Research and Applications (1 ed., vol. 10, pp. 67-74).
40. Esche, S.; Chassapis, C.; Manoochehri, S. (2001). Concurrent product and process design in hot forging. Concurrent Engineering Research and Applications (1 ed., vol. 9, pp. 48-54).
41. Tumkor, S.; Turkmen, N.; Chassapis, C.; Manoochehri, S. (2001). Modeling of heat transfer in thermoplastic composite tape lay-up manufacturing. International Communications in Heat and Mass Transfer (1 ed., vol. 28, pp. 49-58).
42. Jovanovic, V.; Manoochehri, S.; Chassapis, C. (2001). Parameter estimation for resin transfer molding. Engineering Computations (Swansea, Wales) (7-8 ed., vol. 18, pp. 1091-1107).
43. Hummel, S. R.; Chassapis, C. (2000). Configuration design and optimization of universal joints with manufacturing tolerances. Mechanism and Machine Theory (3 ed., vol. 35, pp. 463-476).
44. Gonzalez, F.; Chassapis, C. (1999). Plane strain fracture toughness performance of injection molded long fiber reinforced thermoplastics: An experimental investigation. Journal of Injection Molding Technology (3 ed., vol. 3, pp. 133-140).
45. Hummel, S. R.; Chassapis, C. (1998). Configuration design and optimization of universal joints. Mechanism and Machine Theory (5 ed., vol. 33, pp. 479-490).
46. Tang, L. Q.; Pochiraju, K.; Chassapis, C.; Manoochehri, S. (1998). A computer-aided optimization approach for the design of injection mold cooling systems. Journal of Mechanical Design, Transactions of the ASME (2 ed., vol. 120, pp. 165-174).
47. Skourlis, T. P.; Mehta, S. R.; Chassapis, C.; Manoochehri, S. (1998). Impact fracture behavior of injection molded long glass fiber reinforced polypropylene. Polymer Engineering and Science (1 ed., vol. 38, pp. 79-89).
48. Pochiraju, K.; Chassapis, C.; Manoochehri, S. (1998). Multidisciplinary parametric design optimization for enhancing the affordability of molded composites. Journal of Thermoplastic Composite Materials (4 ed., vol. 11, pp. 364-392).
49. Skourlis, T. P.; Pochiraju, K.; Chassapis, C.; Manoochehri, S. (1998). Structure-modulus relationships for injection-molded long fiber-reinforced polyphthalamides. Composites Part B: Engineering (3 ed., vol. 29, pp. 309-319).
50. Tang, L. Q.; Chassapis, C.; Manoochehri, S. (1997). Optimal cooling system design for multi-cavity injection molding. Finite Elements in Analysis and Design (3 ed., vol. 26, pp. 229-251).
51. Simos, N.; Chassapis, C. (1997). A boundary integral approach to attachment/spherical shell interaction. Journal of Pressure Vessel Technology, Transactions of the ASME (4 ed., vol. 119, pp. 407-413).
52. Cay, F.; Chassapis, C. (1997). An IT view on perspectives of computer aided process planning research. Computers in Industry (3 ed., vol. 34, pp. 307-337).
53. Simos, N.; Chassapis, C. (1997). Classical versus improved thin shell theories: A theoretical argument or a design concern?. Journal of Pressure Vessel Technology, Transactions of the ASME (1 ed., vol. 119, pp. 96-104).
54. Skourlis, T. P.; Chassapis, C.; Manoochehri, S. (1997). Fiber orientation morphological layers in injection molded long fiber reinforced thermoplastics. Journal of Thermoplastic Composite Materials (5 ed., vol. 10, pp. 453-475).
55. Chassapis, C. S.; Tsakalakos, T. (1997). Multidimensional optimization of a stochastic model for X-ray diffraction from superlattices. Computer Physics Communications (2-3 ed., vol. 99, pp. 163-179).
56. Chassapis, C. S.; Petrou, J. K.; Petropoulos, J. H.; Theodorou, D. N. (1996). Analysis of computed trajectories of penetrant micromolecules in a simulated polymeric material. Macromolecules (10 ed., vol. 29, pp. 3615-3624).
57. Tang, L. Q.; Pochiraju, K.; Chassapis, C.; Manoochehri, S. (1996). Three-dimensional transient mold cooling analysis based on galerkin finite element formulation with a matrix-free conjugate gradient technique. International Journal for Numerical Methods in Engineering (18 ed., vol. 39, pp. 3049-3064).
58. Chassapis, C.; Lowen, G. G. (1994). Computer simulation of a press feed mechanism and experimental confirmation. Journal of Mechanical Design, Transactions of the ASME (1 ed., vol. 116, pp. 248-256).
59. Chassapis, C.; Lowen, G. G. (1994). The elastic-dynamic modeling of a press feed mechanism. Journal of Mechanical Design, Transactions of the ASME (1 ed., vol. 116, pp. 238-247).
60. Lowen, G. G.; Chassapis, C. (1986). The elastic behavior of linkages: An update. Mechanism and Machine Theory (1 ed., vol. 21, pp. 33-42).
61. Chassapis, C.; Pneumatikakis, G. (1982). 1,10-phenanthroline-N-oxide chelates with rare earth nitrates. Inorganica Chimica Acta (C ed., vol. 59, pp. 49-52).

Review, Journal

1. Ibrahim, I. H.; Chassapis, C. (2014). Recent patents on risk management during medical device lifecycle “managing the transition from bench to market”. Recent Patents on Engineering (2 ed., vol. 8, pp. 133-142).
2. Skourlis, T. P.; Mohapatra, B.; Chassapis, C.; Manoochehri, S. (1997). Evaluation of the effect of processing parameters on the properties of advanced styrenic resins: A design of experiments approach. Advances in Polymer Technology (2 ed., vol. 16, pp. 117-128).